Used to Dispense
- Activators
- Adhesive Pastes
- Alcohol
- Anaerobics
- Conformal Coatings
- Cyanoacrylates
- Epoxies
- Greases
- Inks
- Solder Pastes
- UV Cure Adhesive (Gels)
- UV Cure Adhesive (Liquid)
Common Applications
- Beads
- Lines and Beads
- Medical Device
- Potting and Encapsulating
- Product Assembly
When to Use This Low Cost Benchtop Syringe Dispensing System
This simple to use dispensing system is affordable, versatile and can be used with a wide range of adhesive and fluid materials. It offers a user friendly interface to easily adjust dispensing settings. Us this system for low volume dispensing of almost any single component fluid or adhesive material from a range of syringe sizes.
This system works with 3cc, 5cc, 10cc, 30cc and 50cc syringes.
Syringe Dispensing System Includes
- Techcon TS250 Simple Air Pressure Dispensing Controller
- Foot Switch
- 50 Pack of Syringe Barrels (Clear, Amber or Black)
- 50 Pack of Syringe Pistons (Wiper, Straight or Easy Flow)
- Nozzle Tip Starter Pack (Additional Options Available)
Questions? Contact one of our dispensing experts for advice on your dispensing application.
See system for low viscosity fluids here.
Details
This low cost and easy-to-use dispensing system uses air pressure to dispense a huge range of fluid or adhesive materials. Operating at 0 to 100 psi, this compact system can handle a wide range viscosities. Simply fill your syringe (or attach your own) and let this air pressured dispensing system do the rest.
About the Dispensing Controller Pump
The Techcon TS250 dispensing controller pump works from 0-100 psi and is perfect for low, medium and high viscosity materials. It has a small, lightweight footprint making it great for benchtop fluid or adhesive dispensing. The TS250 has a digital timer that is controlled with a rotary knob and vacuum control to fine tune dispensing depending on the viscosity of material being used.
This system also includes a rear DB9 interface connection that can connect to a foot pedal or other device for external on/off dispensing.
Common Applications
This system can be used to dispense a huge range of materials. It works best for low to medium volume applications.
Some common applications include:
- Dispensing solder paste on PCBA pads
- Dispensing UV Adhesives
- Medical device manufacturing
- Dispensing greases for lubricating applications
Specifications
Dispensing Pump Specifications
|
Cycle Rate: |
600 cycles/minute |
|
Timing Range: |
0.020 - 60.000 seconds |
| Timing Repeat Tolerance: | +/- 0.001% |
| Input Pressure: | 100 psi (6.9bar) maximum |
| Operating Pressure TS250: | 1 - 100 psi (0.07 - 6.9bar) |
| Dispense Modes: | Timed and Purge |
| Meets or Exceeds: | CE, TUV-GS and NRTL |
Guaranteed Safe Checkout
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
